BHP+27 hp (17%)
Standard
163 hp
Tuned
190 hp
Torque+60 Nm (15%)
Standard
400 Nm
Tuned
460 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumMercedes-Benz E 220 CDI 163hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 220 CDI 163hp? A Stage 1 remap can take this W211 - 2006 - 2009 diesel engine from 163 BHP to 190 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 77thof 102 Mercedes-Benz E engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 220 CDI 163hp is a 2.1L turbocharged diesel engine producing 163 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 460 Nm — a gain of around 27 BHP (17%) and 60 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.