Mercedes-Benz E 300 (2.0T) 258hp Remap
Expected gains of +22 BHP and +50 Nm torque
Get Your Free Quote ↓BHP+22 hp (9%)
Standard
258 hp
Tuned
280 hp
Torque+50 Nm (14%)
Standard
370 Nm
Tuned
420 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz E 300 (2.0T) 258hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz E 300 (2.0T) 258hp? A Stage 1 remap can take this 2020 -> petrol mhev engine from 258 BHP to 280 BHP and from 370 Nm to 420 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz E can achieve.
How this engine compares
- 82ndof 102 Mercedes-Benz E engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz E 300 (2.0T) 258hp is a 2.0L turbocharged petrol mhev engine producing 258 BHP and 370 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 280 BHP and 420 Nm — a gain of around 22 BHP (9%) and 50 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other E 2020 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|