BHP+39 hp (10%)
Standard
381 hp
Tuned
420 hp
Torque+65 Nm (14%)
Standard
475 Nm
Tuned
540 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumMercedes-Benz CLA 45 AMG 381hp ECU Remapping
Considering an ECU remap for your Mercedes-Benz CLA 45 AMG 381hp? A Stage 1 remap can take this C117 - 2016 - 2019 petrol engine from 381 BHP to 420 BHP and from 475 Nm to 540 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mercedes-Benz CLA can achieve.
How this engine compares
- 9thof 30 Mercedes-Benz CLA engines by power gain
- 62%of the 9,842 engines we hold gain data for see a smaller power increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mercedes-Benz CLA 45 AMG 381hp is a 2.0L naturally aspirated petrol engine producing 381 BHP and 475 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 420 BHP and 540 Nm — a gain of around 39 BHP (10%) and 65 Nm (14%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other CLA C117 - 2016 - 2019 Engines
| Engine | BHP | Gain |
|---|