McLaren Artura 3.0 V6 Bi-Turbo 680hp Remap
Expected gains of +30 BHP and +80 Nm torque
Get Your Free Quote ↓BHP+30 hp (4%)
Standard
680 hp
Tuned
710 hp
Torque+80 Nm (11%)
Standard
720 Nm
Tuned
800 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowMcLaren Artura 3.0 V6 Bi-Turbo 680hp ECU Remapping
Considering an ECU remap for your McLaren Artura 3.0 V6 Bi-Turbo 680hp? A Stage 1 remap can take this 2021 -> ... petrol phev engine from 680 BHP to 710 BHP and from 720 Nm to 800 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your McLaren Artura can achieve.
How this engine compares
- 39%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The McLaren Artura 3.0 V6 Bi-Turbo 680hp is a 3.0L turbocharged petrol phev engine producing 680 BHP and 720 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 710 BHP and 800 Nm — a gain of around 30 BHP (4%) and 80 Nm (11%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Technical Specifications
- Fuel Type
- Petrol PHEV
- Aspiration
- Turbocharged
- Displacement
- 3L
- Capacity
- 2993 CC