Mazda CX-3 2.0 Skyactiv-G 150hp Remap
Expected gains of +10 BHP and +16 Nm torque
Get Your Free Quote ↓BHP+10 hp (7%)
Standard
150 hp
Tuned
160 hp
Torque+16 Nm (8%)
Standard
204 Nm
Tuned
220 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowMazda CX-3 2.0 Skyactiv-G 150hp ECU Remapping
Considering an ECU remap for your Mazda CX-3 2.0 Skyactiv-G 150hp? A Stage 1 remap can take this 2015 - 2018 petrol engine from 150 BHP to 160 BHP and from 204 Nm to 220 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda CX-3 can achieve.
How this engine compares
- 7thof 7 Mazda CX-3 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda CX-3 2.0 Skyactiv-G 150hp is a 2.0L naturally aspirated petrol engine producing 150 BHP and 204 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 220 Nm — a gain of around 10 BHP (7%) and 16 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other CX-3 2015 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|