BHP+5 hp (3%)
Standard
165 hp
Tuned
170 hp
Torque+10 Nm (5%)
Standard
210 Nm
Tuned
220 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowMazda 3 2.0 SkyActiv-G 165hp ECU Remapping
Considering an ECU remap for your Mazda 3 2.0 SkyActiv-G 165hp? A Stage 1 remap can take this 2019 -> petrol engine from 165 BHP to 170 BHP and from 210 Nm to 220 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mazda 3 can achieve.
How this engine compares
- 22ndof 24 Mazda 3 engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mazda 3 2.0 SkyActiv-G 165hp is a 2.0L naturally aspirated petrol engine producing 165 BHP and 210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 220 Nm — a gain of around 5 BHP (3%) and 10 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other 3 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|