Maserati Levante 3.0D V6 250hp Remap
Expected gains of +55 BHP and +60 Nm torque
Get Your Free Quote ↓BHP+55 hp (22%)
Standard
250 hp
Tuned
305 hp
Torque+60 Nm (10%)
Standard
600 Nm
Tuned
660 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumMaserati Levante 3.0D V6 250hp ECU Remapping
Considering an ECU remap for your Maserati Levante 3.0D V6 250hp? A Stage 1 remap can take this 2016 -> diesel engine from 250 BHP to 305 BHP and from 600 Nm to 660 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Maserati Levante can achieve.
How this engine compares
- 2ndof 6 Maserati Levante engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Maserati Levante 3.0D V6 250hp is a 2.8L turbocharged diesel engine producing 250 BHP and 600 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 305 BHP and 660 Nm — a gain of around 55 BHP (22%) and 60 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Levante 2016 -> Engines
| Engine | BHP | Gain | Torque |
|---|