BHP+70 hp (15%)
Standard
480 hp
Tuned
550 hp
Torque+350 Nm (15%)
Standard
2300 Nm
Tuned
2650 Nm
Suitability
Good (6.5/10)Gains Profile
BalancedHeadroom
MediumMAN TGA26 480hp ECU Remapping
Considering an ECU remap for your MAN TGA26 480hp? A Stage 1 remap can take this 1e generatie diesel engine from 480 BHP to 550 BHP and from 2300 Nm to 2650 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MAN TGA26 can achieve.
How this engine compares
- 1stof 8 MAN TGA26 engines by power gain
- 92%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MAN TGA26 480hp is a turbocharged diesel engine producing 480 BHP and 2300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 550 BHP and 2650 Nm — a gain of around 70 BHP (15%) and 350 Nm (15%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other TGA26 1e generatie Engines
| Engine | BHP | Gain | Torque |
|---|