BHP+60 hp (19%)
Standard
320 hp
Tuned
380 hp
Torque+350 Nm (22%)
Standard
1600 Nm
Tuned
1950 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMAN TGA18 320hp ECU Remapping
Considering an ECU remap for your MAN TGA18 320hp? A Stage 1 remap can take this All diesel engine from 320 BHP to 380 BHP and from 1600 Nm to 1950 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your MAN TGA18 can achieve.
How this engine compares
- 4thof 8 MAN TGA18 engines by power gain
- 86%of the 9,842 engines we hold gain data for see a smaller power increase
- 98%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The MAN TGA18 320hp is a turbocharged diesel engine producing 320 BHP and 1600 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 1950 Nm — a gain of around 60 BHP (19%) and 350 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other TGA18 All Engines
| Engine | BHP | Gain | Torque |
|---|