BHP+19 hp (18%)
Standard
106 hp
Tuned
125 hp
Torque+33 Nm (13%)
Standard
247 Nm
Tuned
280 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumMahindra Thar 2.5d 106hp ECU Remapping
Considering an ECU remap for your Mahindra Thar 2.5d 106hp? A Stage 1 remap can take this 2010 - 2020 diesel engine from 106 BHP to 125 BHP and from 247 Nm to 280 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra Thar can achieve.
How this engine compares
- 2ndof 2 Mahindra Thar engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mahindra Thar 2.5d 106hp is a 2.5L turbocharged diesel engine producing 106 BHP and 247 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 280 Nm — a gain of around 19 BHP (18%) and 33 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged
- Displacement
- 2.5L
- Capacity
- 2498 CC
- Type
- Car
- Engine Family