BHP+20 hp (14%)
Standard
140 hp
Tuned
160 hp
Torque+90 Nm (31%)
Standard
290 Nm
Tuned
380 Nm
Suitability
Good (7.5/10)Gains Profile
Torque-focusedHeadroom
HighMahindra Genio 2.2 CRDi 140hp ECU Remapping
Considering an ECU remap for your Mahindra Genio 2.2 CRDi 140hp? A Stage 1 remap can take this All diesel engine from 140 BHP to 160 BHP and from 290 Nm to 380 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra Genio can achieve.
How this engine compares
- 2ndof 2 Mahindra Genio engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mahindra Genio 2.2 CRDi 140hp is a 2.2L turbocharged diesel engine producing 140 BHP and 290 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 380 Nm — a gain of around 20 BHP (14%) and 90 Nm (31%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Genio All Engines
| Engine | BHP |
|---|