BHP+15 hp (24%)
Standard
63 hp
Tuned
78 hp
Torque+59 Nm (30%)
Standard
195 Nm
Tuned
254 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighMahindra Bolero 2.5 TDI 63hp ECU Remapping
Considering an ECU remap for your Mahindra Bolero 2.5 TDI 63hp? A Stage 1 remap can take this 2011 -> ... diesel engine from 63 BHP to 78 BHP and from 195 Nm to 254 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mahindra Bolero can achieve.
How this engine compares
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 40%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mahindra Bolero 2.5 TDI 63hp is a 2.5L turbocharged diesel engine producing 63 BHP and 195 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 78 BHP and 254 Nm — a gain of around 15 BHP (24%) and 59 Nm (30%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged
- Displacement