Mack Maxicruise AC - 410 - 12.0 385hp Remap
Expected gains of +55 BHP and +100 Nm torque
Get Your Free Quote ↓BHP+55 hp (14%)
Standard
385 hp
Tuned
440 hp
Torque+100 Nm (4%)
Standard
2250 Nm
Tuned
2350 Nm
Suitability
Moderate (5.5/10)Gains Profile
Power-focusedHeadroom
LowMack Maxicruise AC - 410 - 12.0 385hp ECU Remapping
Considering an ECU remap for your Mack Maxicruise AC - 410 - 12.0 385hp? A Stage 1 remap can take this All diesel engine from 385 BHP to 440 BHP and from 2250 Nm to 2350 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Mack Maxicruise can achieve.
How this engine compares
- 6thof 8 Mack Maxicruise engines by power gain
- 82%of the 9,842 engines we hold gain data for see a smaller power increase
- 79%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Mack Maxicruise AC - 410 - 12.0 385hp is a turbocharged diesel engine producing 385 BHP and 2250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 440 BHP and 2350 Nm — a gain of around 55 BHP (14%) and 100 Nm (4%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other Maxicruise All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|