BHP+12 hp (7%)
Standard
178 hp
Tuned
190 hp
Torque+40 Nm (15%)
Standard
265 Nm
Tuned
305 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumLynk & Co 2 1.5T 178hp ECU Remapping
Considering an ECU remap for your Lynk & Co 2 1.5T 178hp? A Stage 1 remap can take this 2018 -> petrol engine from 178 BHP to 190 BHP and from 265 Nm to 305 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lynk & Co 2 can achieve.
How this engine compares
- 3rdof 3 Lynk & Co 2 engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lynk & Co 2 1.5T 178hp is a 1.5L turbocharged petrol engine producing 178 BHP and 265 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 305 Nm — a gain of around 12 BHP (7%) and 40 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
Other 2 2018 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|