BHP+10 hp (3%)
Standard
350 hp
Tuned
360 hp
Torque+15 Nm (4%)
Standard
400 Nm
Tuned
415 Nm
Suitability
Limited (3/10)Gains Profile
Limited headroomHeadroom
LowLotus Exige S 3.5 V6 350hp ECU Remapping
Considering an ECU remap for your Lotus Exige S 3.5 V6 350hp? A Stage 1 remap can take this All petrol engine from 350 BHP to 360 BHP and from 400 Nm to 415 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Exige can achieve.
How this engine compares
- 4thof 5 Lotus Exige engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lotus Exige S 3.5 V6 350hp is a 3.5L naturally aspirated petrol engine producing 350 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 360 BHP and 415 Nm — a gain of around 10 BHP (3%) and 15 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!High tuned torque: check transmission torque capacity and service history.
Other Exige All Engines
| Engine |
|---|