BHP+20 hp (9%)
Standard
220 hp
Tuned
240 hp
Torque+88 Nm (32%)
Standard
272 Nm
Tuned
360 Nm
Suitability
Moderate (5.5/10)Gains Profile
Torque-focusedHeadroom
HighLotus Europa SC 220hp ECU Remapping
Considering an ECU remap for your Lotus Europa SC 220hp? A Stage 1 remap can take this All petrol engine from 220 BHP to 240 BHP and from 272 Nm to 360 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Europa can achieve.
How this engine compares
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 74%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lotus Europa SC 220hp is a 2.0L naturally aspirated petrol engine producing 220 BHP and 272 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 360 Nm — a gain of around 20 BHP (9%) and 88 Nm (32%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Technical Specifications
- Fuel Type
- Petrol