BHP+20 hp (9%)
Standard
220 hp
Tuned
240 hp
Torque+30 Nm (12%)
Standard
250 Nm
Tuned
280 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumLotus Elise SC 220hp ECU Remapping
Considering an ECU remap for your Lotus Elise SC 220hp? A Stage 1 remap can take this All petrol engine from 220 BHP to 240 BHP and from 250 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lotus Elise can achieve.
How this engine compares
- 1stof 4 Lotus Elise engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 17%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lotus Elise SC 220hp is a 1.8L naturally aspirated petrol engine producing 220 BHP and 250 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 280 Nm — a gain of around 20 BHP (9%) and 30 Nm (12%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Elise All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|