BHP+35 hp (23%)
Standard
150 hp
Tuned
185 hp
Torque+77 Nm (25%)
Standard
308 Nm
Tuned
385 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighLancia Lybra 2.4 JTD 150hp ECU Remapping
Considering an ECU remap for your Lancia Lybra 2.4 JTD 150hp? A Stage 1 remap can take this All diesel engine from 150 BHP to 185 BHP and from 308 Nm to 385 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Lancia Lybra can achieve.
How this engine compares
- 1stof 5 Lancia Lybra engines by power gain
- 54%of the 9,842 engines we hold gain data for see a smaller power increase
- 64%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Lancia Lybra 2.4 JTD 150hp is a 2.4L turbocharged diesel engine producing 150 BHP and 308 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 385 Nm — a gain of around 35 BHP (23%) and 77 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Lybra All Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.9 JTD 105hp | 105 → 140 | +35 |