BHP+29 hp (10%)
Standard
291 hp
Tuned
320 hp
Torque+25 Nm (7%)
Standard
355 Nm
Tuned
380 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowKia Telluride 3.8 V6 291hp ECU Remapping
Considering an ECU remap for your Kia Telluride 3.8 V6 291hp? A Stage 1 remap can take this 2019 - 2022 petrol engine from 291 BHP to 320 BHP and from 355 Nm to 380 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Telluride can achieve.
How this engine compares
- 38%of the 9,842 engines we hold gain data for see a smaller power increase
- 14%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Telluride 3.8 V6 291hp is a 3.8L naturally aspirated petrol engine producing 291 BHP and 355 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 320 BHP and 380 Nm — a gain of around 29 BHP (10%) and 25 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement
- 3.8L
- Capacity
- 3778 CC