BHP+16 hp (19%)
Standard
84 hp
Tuned
100 hp
Torque+18 Nm (15%)
Standard
122 Nm
Tuned
140 Nm
Suitability
Moderate (5/10)Gains Profile
BalancedHeadroom
MediumKia Stonic 1.2 MPI 84hp ECU Remapping
Considering an ECU remap for your Kia Stonic 1.2 MPI 84hp? A Stage 1 remap can take this 2017 - 2019 petrol engine from 84 BHP to 100 BHP and from 122 Nm to 140 Nm of torque (naturally aspirated). This engine scores 5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Stonic can achieve.
How this engine compares
- 6thof 6 Kia Stonic engines by power gain
- 12%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Stonic 1.2 MPI 84hp is a 1.2L naturally aspirated petrol engine producing 84 BHP and 122 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 140 Nm — a gain of around 16 BHP (19%) and 18 Nm (15%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
!Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.