BHP+24 hp (18%)
Standard
136 hp
Tuned
160 hp
Torque+10 Nm (3%)
Standard
320 Nm
Tuned
330 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumKia Sportage 1.6 CRDI 136hp ECU Remapping
Considering an ECU remap for your Kia Sportage 1.6 CRDI 136hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 136 BHP to 160 BHP and from 320 Nm to 330 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Sportage can achieve.
How this engine compares
- 15thof 21 Kia Sportage engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 0%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Sportage 1.6 CRDI 136hp is a 1.6L turbocharged diesel engine producing 136 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 330 Nm — a gain of around 24 BHP (18%) and 10 Nm (3%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Sportage 2018 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CRDI 115hp | 115 → 145 | +30 | 280 → 320 | +40 |