BHP+12 hp (7%)
Standard
163 hp
Tuned
175 hp
Torque+15 Nm (8%)
Standard
195 Nm
Tuned
210 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowKia Sportage 2.0i 16v 163hp ECU Remapping
Considering an ECU remap for your Kia Sportage 2.0i 16v 163hp? A Stage 1 remap can take this 2010 - 2016 petrol engine from 163 BHP to 175 BHP and from 195 Nm to 210 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Sportage can achieve.
How this engine compares
- 19thof 21 Kia Sportage engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Sportage 2.0i 16v 163hp is a 2.0L naturally aspirated petrol engine producing 163 BHP and 195 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 175 BHP and 210 Nm — a gain of around 12 BHP (7%) and 15 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Sportage 2010 - 2016 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|