BHP+12 hp (11%)
Standard
113 hp
Tuned
125 hp
Torque+26 Nm (18%)
Standard
144 Nm
Tuned
170 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumKia Seltos 1.5i 113hp ECU Remapping
Considering an ECU remap for your Kia Seltos 1.5i 113hp? A Stage 1 remap can take this 2023 -> ... petrol engine from 113 BHP to 125 BHP and from 144 Nm to 170 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Seltos can achieve.
How this engine compares
- 4thof 4 Kia Seltos engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Seltos 1.5i 113hp is a 1.5L naturally aspirated petrol engine producing 113 BHP and 144 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 170 Nm — a gain of around 12 BHP (11%) and 26 Nm (18%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement