BHP+12 hp (7%)
Standard
183 hp
Tuned
195 hp
Torque+15 Nm (6%)
Standard
265 Nm
Tuned
280 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowKia Niro 1.6 GDI Hybrid 183hp ECU Remapping
Considering an ECU remap for your Kia Niro 1.6 GDI Hybrid 183hp? A Stage 1 remap can take this 2021 -> ... petrol hybrid engine from 183 BHP to 195 BHP and from 265 Nm to 280 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Niro can achieve.
How this engine compares
- 1stof 3 Kia Niro engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 3%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Niro 1.6 GDI Hybrid 183hp is a 1.6L naturally aspirated petrol hybrid engine producing 183 BHP and 265 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 280 Nm — a gain of around 12 BHP (7%) and 15 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Niro 2021 -> ... Engines
| Engine | BHP | Gain | Torque | Gain |
|---|