BHP+21 hp (7%)
Standard
294 hp
Tuned
315 hp
Torque+24 Nm (7%)
Standard
343 Nm
Tuned
367 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowKia K7 3.3 GDI V6 294hp ECU Remapping
Considering an ECU remap for your Kia K7 3.3 GDI V6 294hp? A Stage 1 remap can take this 2017 -> petrol engine from 294 BHP to 315 BHP and from 343 Nm to 367 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia K7 can achieve.
How this engine compares
- 4thof 6 Kia K7 engines by power gain
- 24%of the 9,842 engines we hold gain data for see a smaller power increase
- 13%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia K7 3.3 GDI V6 294hp is a 3.3L naturally aspirated petrol engine producing 294 BHP and 343 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 315 BHP and 367 Nm — a gain of around 21 BHP (7%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other K7 2017 -> Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|