BHP+28 hp (25%)
Standard
112 hp
Tuned
140 hp
Torque+55 Nm (22%)
Standard
245 Nm
Tuned
300 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighKia Cerato 2.0 CRDi 112hp ECU Remapping
Considering an ECU remap for your Kia Cerato 2.0 CRDi 112hp? A Stage 1 remap can take this 2004 - 2006 diesel engine from 112 BHP to 140 BHP and from 245 Nm to 300 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Cerato can achieve.
How this engine compares
- 2ndof 4 Kia Cerato engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 38%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Cerato 2.0 CRDi 112hp is a 2.0L turbocharged diesel engine producing 112 BHP and 245 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 300 Nm — a gain of around 28 BHP (25%) and 55 Nm (22%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Other Cerato 2004 - 2006 Engines
| Engine | BHP | Gain |
|---|