BHP+25 hp (25%)
Standard
100 hp
Tuned
125 hp
Torque+70 Nm (32%)
Standard
220 Nm
Tuned
290 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighKia Ceed 1.4 CRDi 100hp ECU Remapping
Considering an ECU remap for your Kia Ceed 1.4 CRDi 100hp? A Stage 1 remap can take this 2010 - 2015 diesel engine from 100 BHP to 125 BHP and from 220 Nm to 290 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Ceed can achieve.
How this engine compares
- 25thof 33 Kia Ceed engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 55%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Ceed 1.4 CRDi 100hp is a 1.4L turbocharged diesel engine producing 100 BHP and 220 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 290 Nm — a gain of around 25 BHP (25%) and 70 Nm (32%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Other Ceed 2010 - 2015 Engines
| Engine | BHP | Gain |
|---|