BHP+25 hp (22%)
Standard
115 hp
Tuned
140 hp
Torque+65 Nm (25%)
Standard
255 Nm
Tuned
320 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighKia Ceed 1.6 CRDi 115hp ECU Remapping
Considering an ECU remap for your Kia Ceed 1.6 CRDi 115hp? A Stage 1 remap can take this 2007 - 2010 diesel engine from 115 BHP to 140 BHP and from 255 Nm to 320 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Kia Ceed can achieve.
How this engine compares
- 25thof 33 Kia Ceed engines by power gain
- 28%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Kia Ceed 1.6 CRDi 115hp is a 1.6L turbocharged diesel engine producing 115 BHP and 255 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 320 Nm — a gain of around 25 BHP (22%) and 65 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
!Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.