BHP+20 hp (13%)
Standard
150 hp
Tuned
170 hp
Torque+40 Nm (15%)
Standard
270 Nm
Tuned
310 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumJeep Renegade 1.3 GSE 150hp ECU Remapping
Considering an ECU remap for your Jeep Renegade 1.3 GSE 150hp? A Stage 1 remap can take this 2019 -> petrol engine from 150 BHP to 170 BHP and from 270 Nm to 310 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Renegade can achieve.
How this engine compares
- 7thof 11 Jeep Renegade engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Renegade 1.3 GSE 150hp is a 1.3L naturally aspirated petrol engine producing 150 BHP and 270 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 170 BHP and 310 Nm — a gain of around 20 BHP (13%) and 40 Nm (15%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Renegade 2019 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|