BHP+44 hp (32%)
Standard
136 hp
Tuned
180 hp
Torque+60 Nm (19%)
Standard
320 Nm
Tuned
380 Nm
Suitability
Excellent (8/10)Gains Profile
Power-focusedHeadroom
HighJeep Commander 2.2 CRD 136hp ECU Remapping
Considering an ECU remap for your Jeep Commander 2.2 CRD 136hp? A Stage 1 remap can take this 2011 - 2020 diesel engine from 136 BHP to 180 BHP and from 320 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jeep Commander can achieve.
How this engine compares
- 3rdof 9 Jeep Commander engines by power gain
- 70%of the 9,842 engines we hold gain data for see a smaller power increase
- 41%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jeep Commander 2.2 CRD 136hp is a 2.2L turbocharged diesel engine producing 136 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 380 Nm — a gain of around 44 BHP (32%) and 60 Nm (19%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged
- Displacement
- 2.2L
- Capacity
- 2143 CC
- Type
- Car
- Engine Family