BHP+15 hp (6%)
Standard
240 hp
Tuned
255 hp
Torque+20 Nm (7%)
Standard
300 Nm
Tuned
320 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowJaguar S Type 3.0 V6 240hp ECU Remapping
Considering an ECU remap for your Jaguar S Type 3.0 V6 240hp? A Stage 1 remap can take this All petrol engine from 240 BHP to 255 BHP and from 300 Nm to 320 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar S Type can achieve.
How this engine compares
- 4thof 6 Jaguar S Type engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jaguar S Type 3.0 V6 240hp is a 3.0L naturally aspirated petrol engine producing 240 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 255 BHP and 320 Nm — a gain of around 15 BHP (6%) and 20 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted)..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other S Type All Engines
| Engine | BHP | Gain |
|---|