BHP+50 hp (17%)
Standard
300 hp
Tuned
350 hp
Torque+50 Nm (7%)
Standard
700 Nm
Tuned
750 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumJaguar F Pace 3.0D 300hp ECU Remapping
Considering an ECU remap for your Jaguar F Pace 3.0D 300hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 300 BHP to 350 BHP and from 700 Nm to 750 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Jaguar F Pace can achieve.
How this engine compares
- 2ndof 9 Jaguar F Pace engines by power gain
- 76%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Jaguar F Pace 3.0D 300hp is a 3.0L turbocharged diesel engine producing 300 BHP and 700 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 350 BHP and 750 Nm — a gain of around 50 BHP (17%) and 50 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted). at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other F Pace 2015 - 2019 Engines
| Engine | BHP |
|---|