BHP+58 hp (21%)
Standard
272 hp
Tuned
330 hp
Torque+220 Nm (23%)
Standard
950 Nm
Tuned
1170 Nm
Suitability
Good (7.5/10)Gains Profile
BalancedHeadroom
HighIveco EuroTech 272hp ECU Remapping
Considering an ECU remap for your Iveco EuroTech 272hp? A Stage 1 remap can take this All diesel engine from 272 BHP to 330 BHP and from 950 Nm to 1170 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco EuroTech can achieve.
How this engine compares
- 11thof 15 Iveco EuroTech engines by power gain
- 85%of the 9,842 engines we hold gain data for see a smaller power increase
- 95%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco EuroTech 272hp is a turbocharged diesel engine producing 272 BHP and 950 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 1170 Nm — a gain of around 58 BHP (21%) and 220 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other EuroTech All Engines
| Engine | BHP | Gain | Torque |
|---|