BHP+70 hp (13%)
Standard
520 hp
Tuned
590 hp
Torque+400 Nm (17%)
Standard
2300 Nm
Tuned
2700 Nm
Suitability
Good (7/10)Gains Profile
BalancedHeadroom
MediumIveco EuroStar 520hp ECU Remapping
Considering an ECU remap for your Iveco EuroStar 520hp? A Stage 1 remap can take this All diesel engine from 520 BHP to 590 BHP and from 2300 Nm to 2700 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Iveco EuroStar can achieve.
How this engine compares
- 1stof 5 Iveco EuroStar engines by power gain
- 92%of the 9,842 engines we hold gain data for see a smaller power increase
- 99%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Iveco EuroStar 520hp is a turbocharged diesel engine producing 520 BHP and 2300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 590 BHP and 2700 Nm — a gain of around 70 BHP (13%) and 400 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other EuroStar All Engines
| Engine | BHP | Gain | Torque |
|---|