BHP+40 hp (27%)
Standard
150 hp
Tuned
190 hp
Torque+45 Nm (12%)
Standard
375 Nm
Tuned
420 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumIsuzu N-Series 3.0D 150hp ECU Remapping
Considering an ECU remap for your Isuzu N-Series 3.0D 150hp? A Stage 1 remap can take this All diesel engine from 150 BHP to 190 BHP and from 375 Nm to 420 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu N-Series can achieve.
How this engine compares
- 2ndof 2 Isuzu N-Series engines by power gain
- 63%of the 9,842 engines we hold gain data for see a smaller power increase
- 25%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Isuzu N-Series 3.0D 150hp is a 3.0L turbocharged diesel engine producing 150 BHP and 375 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 420 Nm — a gain of around 40 BHP (27%) and 45 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other N-Series All Engines
| Engine | BHP | Gain | Torque |
|---|