BHP+28 hp (16%)
Standard
177 hp
Tuned
205 hp
Torque+50 Nm (12%)
Standard
430 Nm
Tuned
480 Nm
Suitability
Good (6.5/10)Gains Profile
Power-focusedHeadroom
MediumIsuzu MU-X 3.0d 177hp ECU Remapping
Considering an ECU remap for your Isuzu MU-X 3.0d 177hp? A Stage 1 remap can take this All diesel engine from 177 BHP to 205 BHP and from 430 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu MU-X can achieve.
How this engine compares
- 3rdof 3 Isuzu MU-X engines by power gain
- 37%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Isuzu MU-X 3.0d 177hp is a 3.0L turbocharged diesel engine producing 177 BHP and 430 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 480 Nm — a gain of around 28 BHP (16%) and 50 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other MU-X All Engines
| Engine | BHP | Gain | Torque |
|---|