Isuzu I-Series I-290 2.9 185hp Remap
Expected gains of +20 BHP and +17 Nm torque
Get Your Free Quote ↓BHP+20 hp (11%)
Standard
185 hp
Tuned
205 hp
Torque+17 Nm (7%)
Standard
258 Nm
Tuned
275 Nm
Suitability
Moderate (4/10)Gains Profile
Power-focusedHeadroom
LowIsuzu I-Series I-290 2.9 185hp ECU Remapping
Considering an ECU remap for your Isuzu I-Series I-290 2.9 185hp? A Stage 1 remap can take this All petrol engine from 185 BHP to 205 BHP and from 258 Nm to 275 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu I-Series can achieve.
How this engine compares
- 1stof 4 Isuzu I-Series engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Isuzu I-Series I-290 2.9 185hp is a 2.9L naturally aspirated petrol engine producing 185 BHP and 258 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 205 BHP and 275 Nm — a gain of around 20 BHP (11%) and 17 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other I-Series All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|