BHP+20 hp (7%)
Standard
275 hp
Tuned
295 hp
Torque+22 Nm (6%)
Standard
373 Nm
Tuned
395 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowIsuzu Ascender 4.2 275hp ECU Remapping
Considering an ECU remap for your Isuzu Ascender 4.2 275hp? A Stage 1 remap can take this 2003 - 2008 petrol engine from 275 BHP to 295 BHP and from 373 Nm to 395 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Isuzu Ascender can achieve.
How this engine compares
- 1stof 2 Isuzu Ascender engines by power gain
- 14%of the 9,842 engines we hold gain data for see a smaller power increase
- 12%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Isuzu Ascender 4.2 275hp is a 4.2L naturally aspirated petrol engine producing 275 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 395 Nm — a gain of around 20 BHP (7%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Ascender 2003 - 2008 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|