BHP+22 hp (8%)
Standard
262 hp
Tuned
284 hp
Torque+26 Nm (8%)
Standard
334 Nm
Tuned
360 Nm
Suitability
Moderate (4/10)Gains Profile
BalancedHeadroom
LowInfiniti QX60 3.5 V6 262hp ECU Remapping
Considering an ECU remap for your Infiniti QX60 3.5 V6 262hp? A Stage 1 remap can take this 2016 -> petrol engine from 262 BHP to 284 BHP and from 334 Nm to 360 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Infiniti QX60 can achieve.
How this engine compares
- 1stof 2 Infiniti QX60 engines by power gain
- 25%of the 9,842 engines we hold gain data for see a smaller power increase
- 16%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Infiniti QX60 3.5 V6 262hp is a 3.5L naturally aspirated petrol engine producing 262 BHP and 334 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 284 BHP and 360 Nm — a gain of around 22 BHP (8%) and 26 Nm (8%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other QX60 2016 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|