BHP+15 hp (6%)
Standard
235 hp
Tuned
250 hp
Torque+50 Nm (9%)
Standard
550 Nm
Tuned
600 Nm
Suitability
Moderate (5.5/10)Gains Profile
Limited headroomHeadroom
LowInfiniti G37/M37 3.0d 235hp ECU Remapping
Considering an ECU remap for your Infiniti G37/M37 3.0d 235hp? A Stage 1 remap can take this All diesel engine from 235 BHP to 250 BHP and from 550 Nm to 600 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Infiniti G37/M37 can achieve.
How this engine compares
- 2ndof 3 Infiniti G37/M37 engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 27%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Infiniti G37/M37 3.0d 235hp is a 3.0L turbocharged diesel engine producing 235 BHP and 550 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 250 BHP and 600 Nm — a gain of around 15 BHP (6%) and 50 Nm (9%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!High tuned torque: check transmission torque capacity and service history.
Other G37/M37 All Engines
| Engine | BHP | Gain | Torque | Gain |
|---|