BHP+11 hp (4%)
Standard
306 hp
Tuned
317 hp
Torque+19 Nm (5%)
Standard
363 Nm
Tuned
382 Nm
Suitability
Limited (3.5/10)Gains Profile
Limited headroomHeadroom
LowInfiniti G35 3.5 V6 306hp ECU Remapping
Considering an ECU remap for your Infiniti G35 3.5 V6 306hp? A Stage 1 remap can take this All petrol engine from 306 BHP to 317 BHP and from 363 Nm to 382 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Infiniti G35 can achieve.
How this engine compares
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Infiniti G35 3.5 V6 306hp is a 3.5L naturally aspirated petrol engine producing 306 BHP and 363 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 317 BHP and 382 Nm — a gain of around 11 BHP (4%) and 19 Nm (5%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement
- 3.5L
- Capacity
- 3498 CC