BHP+27 hp (21%)
Standard
128 hp
Tuned
155 hp
Torque+65 Nm (25%)
Standard
260 Nm
Tuned
325 Nm
Suitability
Excellent (8/10)Gains Profile
BalancedHeadroom
HighHyundai Verna 1.6 CRDi 128hp ECU Remapping
Considering an ECU remap for your Hyundai Verna 1.6 CRDi 128hp? A Stage 1 remap can take this 2017 - 2020 diesel engine from 128 BHP to 155 BHP and from 260 Nm to 325 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Verna can achieve.
How this engine compares
- 3rdof 5 Hyundai Verna engines by power gain
- 35%of the 9,842 engines we hold gain data for see a smaller power increase
- 52%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Verna 1.6 CRDi 128hp is a 1.6L turbocharged diesel engine producing 128 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 325 Nm — a gain of around 27 BHP (21%) and 65 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Technical Specifications
- Fuel Type
- Diesel
- Aspiration
- Turbocharged
- Displacement
- 1.6L
- Capacity
- 1582 CC
- Type
- Car
- Engine Family