BHP+12 hp (11%)
Standard
112 hp
Tuned
124 hp
Torque+14 Nm (10%)
Standard
146 Nm
Tuned
160 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumHyundai Verna 1.6i 16V 112hp ECU Remapping
Considering an ECU remap for your Hyundai Verna 1.6i 16V 112hp? A Stage 1 remap can take this 2010 -> petrol engine from 112 BHP to 124 BHP and from 146 Nm to 160 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Verna can achieve.
How this engine compares
- 5thof 5 Hyundai Verna engines by power gain
- 7%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Verna 1.6i 16V 112hp is a 1.6L naturally aspirated petrol engine producing 112 BHP and 146 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 124 BHP and 160 Nm — a gain of around 12 BHP (11%) and 14 Nm (10%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Verna 2010 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|