Hyundai Veloster 1.6 GDI 140hp Remap
Expected gains of +15 BHP and +18 Nm torque
Get Your Free Quote ↓BHP+15 hp (11%)
Standard
140 hp
Tuned
155 hp
Torque+18 Nm (11%)
Standard
167 Nm
Tuned
185 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumHyundai Veloster 1.6 GDI 140hp ECU Remapping
Considering an ECU remap for your Hyundai Veloster 1.6 GDI 140hp? A Stage 1 remap can take this 2011 -> petrol engine from 140 BHP to 155 BHP and from 167 Nm to 185 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Veloster can achieve.
How this engine compares
- 4thof 4 Hyundai Veloster engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 7%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Veloster 1.6 GDI 140hp is a 1.6L naturally aspirated petrol engine producing 140 BHP and 167 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 185 Nm — a gain of around 15 BHP (11%) and 18 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Veloster 2011 -> Engines
| Engine | BHP | Gain | Torque | Gain |
|---|