BHP+24 hp (18%)
Standard
136 hp
Tuned
160 hp
Torque+40 Nm (13%)
Standard
320 Nm
Tuned
360 Nm
Suitability
Good (7/10)Gains Profile
Power-focusedHeadroom
MediumHyundai Tucson 1.6 CRDi 136hp ECU Remapping
Considering an ECU remap for your Hyundai Tucson 1.6 CRDi 136hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 136 BHP to 160 BHP and from 320 Nm to 360 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Tucson can achieve.
How this engine compares
- 10thof 15 Hyundai Tucson engines by power gain
- 27%of the 9,842 engines we hold gain data for see a smaller power increase
- 21%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Tucson 1.6 CRDi 136hp is a 1.6L turbocharged diesel engine producing 136 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 360 Nm — a gain of around 24 BHP (18%) and 40 Nm (12%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Other Tucson 2018 - 2020 Engines
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CRDi 116hp | 116 → 160 | +44 |