BHP+36 hp (14%)
Standard
264 hp
Tuned
300 hp
Torque+85 Nm (23%)
Standard
365 Nm
Tuned
450 Nm
Suitability
Good (6.5/10)Gains Profile
Torque-focusedHeadroom
MediumHyundai Santa Fe 2.0T 264hp ECU Remapping
Considering an ECU remap for your Hyundai Santa Fe 2.0T 264hp? A Stage 1 remap can take this 2013 - 2018 petrol engine from 264 BHP to 300 BHP and from 365 Nm to 450 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Santa Fe can achieve.
How this engine compares
- 1stof 10 Hyundai Santa Fe engines by power gain
- 60%of the 9,842 engines we hold gain data for see a smaller power increase
- 73%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Santa Fe 2.0T 264hp is a 2.0L turbocharged petrol engine producing 264 BHP and 365 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 450 Nm — a gain of around 36 BHP (14%) and 85 Nm (23%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Turbo petrol: fuel quality and cooling can influence repeatable performance.
!High tuned torque: check transmission torque capacity and service history.