BHP+10 hp (7%)
Standard
135 hp
Tuned
145 hp
Torque+13 Nm (8%)
Standard
157 Nm
Tuned
170 Nm
Suitability
Moderate (4/10)Gains Profile
Limited headroomHeadroom
LowHyundai i30 1.6 GDI 135hp ECU Remapping
Considering an ECU remap for your Hyundai i30 1.6 GDI 135hp? A Stage 1 remap can take this 2010 - 2015 petrol engine from 135 BHP to 145 BHP and from 157 Nm to 170 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai i30 can achieve.
How this engine compares
- 26thof 26 Hyundai i30 engines by power gain
- 2%of the 9,842 engines we hold gain data for see a smaller power increase
- 2%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai i30 1.6 GDI 135hp is a 1.6L naturally aspirated petrol engine producing 135 BHP and 157 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 145 BHP and 170 Nm — a gain of around 10 BHP (7%) and 13 Nm (8%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other i30 2010 - 2015 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|