BHP+4 hp (5%)
Standard
84 hp
Tuned
88 hp
Torque+16 Nm (14%)
Standard
114 Nm
Tuned
130 Nm
Suitability
Moderate (4/10)Gains Profile
Torque-focusedHeadroom
LowHyundai i10 1.2i 84hp ECU Remapping
Considering an ECU remap for your Hyundai i10 1.2i 84hp? A Stage 1 remap can take this 2008 - 2018 petrol engine from 84 BHP to 88 BHP and from 114 Nm to 130 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai i10 can achieve.
How this engine compares
- 6thof 6 Hyundai i10 engines by power gain
- 0%of the 9,842 engines we hold gain data for see a smaller power increase
- 6%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai i10 1.2i 84hp is a 1.2L naturally aspirated petrol engine producing 84 BHP and 114 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 88 BHP and 130 Nm — a gain of around 4 BHP (5%) and 16 Nm (14%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other i10 2008 - 2018 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|