BHP+15 hp (11%)
Standard
132 hp
Tuned
147 hp
Torque+20 Nm (13%)
Standard
157 Nm
Tuned
177 Nm
Suitability
Moderate (4.5/10)Gains Profile
BalancedHeadroom
MediumHyundai Elantra 1.6 MPI 132hp ECU Remapping
Considering an ECU remap for your Hyundai Elantra 1.6 MPI 132hp? A Stage 1 remap can take this 2007 - 2016 petrol engine from 132 BHP to 147 BHP and from 157 Nm to 177 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Elantra can achieve.
How this engine compares
- 8thof 8 Hyundai Elantra engines by power gain
- 9%of the 9,842 engines we hold gain data for see a smaller power increase
- 8%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Hyundai Elantra 1.6 MPI 132hp is a 1.6L naturally aspirated petrol engine producing 132 BHP and 157 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 147 BHP and 177 Nm — a gain of around 15 BHP (11%) and 20 Nm (13%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Technical Specifications
- Fuel Type
- Petrol
- Aspiration
- Naturally Aspirated
- Displacement