BHP+18 hp (9%)
Standard
200 hp
Tuned
218 hp
Torque+32 Nm (14%)
Standard
232 Nm
Tuned
264 Nm
Suitability
Moderate (4.5/10)Gains Profile
Torque-focusedHeadroom
MediumHonda Odyssey 2.4i VTEC 200hp ECU Remapping
Considering an ECU remap for your Honda Odyssey 2.4i VTEC 200hp? A Stage 1 remap can take this 2008 - 2013 petrol engine from 200 BHP to 218 BHP and from 232 Nm to 264 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Honda Odyssey can achieve.
How this engine compares
- 3rdof 5 Honda Odyssey engines by power gain
- 13%of the 9,842 engines we hold gain data for see a smaller power increase
- 19%of engines with torque data see a smaller torque increase
Comparisons are calculated from our own recorded Stage 1 figures.
Assessment
The Honda Odyssey 2.4i VTEC 200hp is a 2.4L naturally aspirated petrol engine producing 200 BHP and 232 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 218 BHP and 264 Nm — a gain of around 18 BHP (9%) and 32 Nm (14%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Considerations
!Naturally aspirated engine: gains are usually limited; results vary widely.
Other Odyssey 2008 - 2013 Engines
| Engine | BHP | Gain | Torque | Gain |
|---|